Engine Flush (AEF)
AMSOIL Fast Acting Engine Flush is made from a carefully
selected blend of solvents and special cleaning agents that
dissolve and disperse harmful deposits formed in the
crankcase, cylinder walls, pistons and rings of an internal
combustion engine. When used as directed, it cleans and
restores operating efficiency to valves, valve lifters,
rocker arms, and pistons for improved horsepower, fuel
economy, and performance. Use before changing oil.
Why Clean Your Engine?
Chances are, when your engine was new it delivered the
power and fuel efficiency it was designed for. But now, as
your engine accumulates miles, things are happening that are
adversely affecting its performance. Slowly but surely, your
engine is gathering harmful deposits that will eventually
cost you money.
Even though you may follow a routine
service schedule, your driving conditions may be far from
routine. Stop and go driving, prolonged periods of idling,
short trips that don't allow your engine time to warm up,
towing a trailer, the ingestion of airborne dirt, fuel
dilution, water condensation, and oxidized oil will
eventually cause the formation of a thick, gummy deposit
known as sludge. Settling throughout the engine, sludge will
clog oil passages, restricting the flow of oil to vital
engine parts, especially in the upper valve train areas.
Don't put clean oil in a dirty engine!
When an engine gets dirty, even regular oil changes can't
help restore its operating efficiency. The detergent
/dispersants in most conventional engine oils can't handle
the abnormal amounts of contamination found in a "dirty"
engine. The new oil becomes dirty long before it should,
losing much of its ability to lubricate and protect your
engine and actually accelerating the formation of more
sludge and varnish.
In this age of longer recommended
drain intervals, it is especially important to have a clean
engine before changing oil. Using AMSOIL Fast Acting Engine
Flush when you change oil is an excellent way to guarantee
your engine stays clean. It has special solvents and
cleaning agents that act fast but gently to remove harmful
deposits that can cost you money in excessive fuel
consumption and mechanical repairs.
AMSOIL Engine
Flush is especially recommended for use before changing to
AMSOIL Synthetic Motor Oils, assuring that these super
premium long life oils provide the maximum protection and
service life they are designed to deliver.
The AMSOIL Formula for Better Engine
Performance
1) FLUSH: To quickly clean
residual sludge and engine deposits, AMSOIL Engine Flush is
recommended: Change the oil filter and add the flush (about
10% of the oil capacity). Do not overfill the crankcase.
Idle the engine 15 to 20 minutes, then immediately drain the
old oil and flush.
*Note: Engine Flush is not
recommended for use in transmissions, differentials,
air-cooled engines, engines that share a common oil sump
with the transmission (motorcycles & ATV's) or engine not
equipped with an oil filter.
2) INSTALL:
Remove the old oil filter and replace it with an
AMSOIL Ea
Oil Filter. Ea Oil Filters feature advanced full
synthetic nanofiber technology, making them the highest
efficiency filters that are available for the auto/light
truck market.
3) POUR: Fill
the engine's crankcase with the AMSOIL Synthetic Motor Oil
of the viscosity grade recommended by your vehicle's
manufacturer. AMSOIL Synthetic Motor Oils are highly
resistant to oxidation and provide exceptional
detergent/dispersant properties, helping keep your engine
free of further sludge and varnish build-up.
4) CHANGE: Replace your present air
filter with an
AMSOIL Ea
Air Filter. AMSOIL Ea Air Filters represent a major
breakthrough in filtration technology. The revolutionary
nanofiber technology used in AMSOIL Ea Filters captures more
dirt, holds more dirt and allows better air flow than
conventional air filters. AMSOIL Ea Filters improve engine
performance and help engines last longer.
A clean engine performs better and lasts longer.
Clean your engine and keep it clean with quality AMSOIL
products.